AEG Loop User Manual

NOTE
If DIRECT CALL is set to ON, and you want to change it back to OFF,
Press
M
and . to select HS SETTINGS, and follow the step 2
to 4 above to turn the feature off.
11.2.2 Alarm
You can use this phone to set an alarm clock. When an alarm is
set, <ALARM ICON> displays on the LCD. When the alarm time is
reached, the <ALARM ICON> and “ALARM ON” flash on the screen.
The handset also rings for 45 seconds.
•Press
M
and . to select HS SETTINGS.
•Press
M
and . to select ALARM.
•Press
M
and . to select ON or OFF.
•Press
M
to confirm.
If ON is selected:
•Press
M
then use the keypad to enter the time.
•Press
M
to confirm. The display shows the current time and date,
and you are prompted to set the snooze function.
•Press
M
and . to select ON or OFF.
•Press
M
to confirm.
11.2.3 Set the Ringer Melody for External Calls
You can set the melody played when receiving an external call. There
are 10 melodies available.
•In idle mode, press
M
and . to select HS SETTINGS.
•Press
M
and . to select RING SETUP.
•Press
M
to show EXT RING.
•Press
M
and . to select the desired ringer melody.
NOTE
The respective ringer melody will play as you step through the melody
list.
•Press
M
to confirm your choice.
11.2.4 Set the Ringer Melody for Internal Calls
You can set the melody played when receiving an intercom call. There
are 10 melodies available.
•In idle mode, press
M
and . to select HS SETTINGS.
•Press
M
and . to select RING SETUP.

AEG Loop Specifications

General

Brand	AEG
Model	Loop
Category	Cordless Telephone
Language	English