AEG Loop User Manual

22
11.2.7 Rename the Handset
•Press
M
and . to select HS SETTINGS.
•Press
M
and . to select RENAME HS.
•Press
M
and enter the name of your handset
•Press
M
to confirm.
11.2.8 Set the Auto Answer
•If you turn on the Auto Answer, you can answer a call automatically
by just lifting the handset off the base or charger, without having to
press any key.
•Press
M
and . to select HS SETTINGS.
•Press
M
and . to select AUTO ANSWER.
•Press
M
and . to select ON or OFF.
•Press
M
to confirm.
11.2.9 Change the System PIN Code
A 4-digit system PIN code is used for changing the system settings of
the base station. It is used to protect your phone against unauthorised
use. The default system PIN code is 0000.
•In idle mode, press
M
and . to select BS SETTINGS.
•Press
M
and . to select CHANGE PIN.
•Press
M
to show OLD PIN? ----.
•Enter the current system PIN.
•Press
M
then enter your new 4-digit system PIN.
•Press
M
then enter your new 4-digit system PIN again.
NOTE
If the new PIN entered in Step 6 is not the same as the new system PIN
entered in Step 5, you must enter your new system PIN again in Step 5.
•Press Mto confirm your new PIN.
11.3 Reset Your Phone
You can reset your phone to the default settings. After reset, all your
personal settings, call list entries and redial list entries will be deleted,
but your phonebook remains unchanged.
•Press
M
and . to select DEFAULT.
•Press
M
and you are requested to enter the 4-digit system PIN.
•Enter the 4-digit system PIN.

AEG Loop Specifications

General

Brand	AEG
Model	Loop
Category	Cordless Telephone
Language	English