•Press
M
to confirm
•Press
M
to re-confirm.
11.4 Register a Handset
Your handset is pre-registered to the base station. Up to five handsets
can be registered to a a single base station.
If for some reason, the handset is not registered to the base station,
REGISTER” will be displayed on the handset screen, register your
handset following the process below.
•Press and hold on the base station for about five seconds, the base
station is entered into registration mode.
•Press
M
and . to select REGISTRATION.
•Press
M
and you are requested to enter the 4-digit system PIN.
•Enter the 4-digit system PIN and press
M
to confirm.
NOTE
If the handset registration is successful, the handset will automatically
be allocated the next available handset number. This handset number
is shown in the handset display in standby mode.
11.5 Deregister a Handset
You may need to deregister a handset if one of your handsets becomes
faulty or lost and needs to be replaced.
You will need to to enter the 4-digit System PIN (default setting 0000)
in order to de-register a handset from the base station.
NOTE
You cannot deregister the handset that you are currently using.
•In idle mode, press
M
and . to select BS SETTINGS.
•Press
M
and . to select DELETE HS.
•Press
M
to show PIN?----.
•Enter the 4-digit system PIN.
•Press
M.
The first of the registered handsets is displayed.
•Press . to find the handset you want to de-register.
•Press
M
to confirm and the handset will be de-registered.
To Next Page
Loading...
Need help?
General
