9.7 Turn the Keypad Lock ON/OFF
•In idle, press and hold
to turn on the keypad lock. The “X” icon
is displayed on the LCD.
•To unlock the keypad, press and hold X .
9.8 Find the Handset (PAGING)
Paging is a useful way for finding lost handset(s).
•Press on the base station. All the registered and available handsets
will produce the paging tone and “PAGING” is displayed on the
LCD.
•Press
T
/
O
/
m
on any handset or on the base station again to
stop paging.
NOTE
If there is an incoming call during paging, the phone will ring with the
incoming call instead of paging.
9.9 Make an Internal Call
This feature is only applicable when there are at least two registered
handsets. It allows you to make internal calls, transfer external calls
from one handset to another handset and make conference calls. If the
called handset is not answered within 60 seconds, the called handset
will stop ringing and the calling handset will return to standby mode.
9.9.1 Call Another Handset
•In idle mode, press
M
and the screen displays all registered
handsets except the calling handset.
•Enter the desired handset number to intercom with.
•The called handset rings and press
T
on the called handset to
establish the internal call.
NOTES
• Ifonlyonehandsetisregisteredtothebasestation,press
m
and
it will display “NOT POSSIBLE”.
• Ifonlytwohandsetsareregisteredtothebasestation,press
m
will connect to another handset immediately.
15