11. BEFORE FIRST USE
1. Make sure that the electrical power is
available and the water tap is open.
2. Pour 2 litres of water into the detergent
compartment marked by .
This action activates the drain system.
3. Pour a small quantity of detergent into the
compartment marked by .
4. Set and start a programme for cotton at
the highest temperature without any
laundry in the drum.
This removes all possible dirt from the drum
and the tub.
12. DAILY USE - WASHING ONLY
WARNING!
Refer to Safety chapters.
12.1 Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Press the On/Off button for a few
seconds to activate the appliance.
A short tune sounds.
12.2 Loading the laundry
1. Open the appliance door.
2. Empty the pockets and unfold the items
before you put them in the appliance.
3. Put the laundry in the drum, one item at a
time.
Do not put too much laundry in the drum.
4. Close the door firmly.
CAUTION!
Make sure that no laundry gets caught
between the seal and the door to avoid
risk of water leakage and damage to the
laundry.
Washing heavily oiled, greasy stains
could cause damage to rubber parts of
the washing machine.
12.3 Filling the detergent and
additives
- Compartment for prewash phase, soak pro‐
gramme or stain remover.
- Compartment for washing phase.
- Compartment for fabric softener and other liquid
treatments(fabric conditioner, starch).
- Maximum level for quantity of liquid additives.
ENGLISH 37
To Next Page
Loading...
