Illustration 3.3: Step 2 of 7: Display Language
To change the language setting later, refer to
Setup, Setup Details
.
Step 3 of 7: Time and date
Enter
• time in 24-hour format
• date
• time zone
Accuracy is important, because date and time are used for logging purposes. Adjustment for
daylight savings is automatic.
Illustration 3.4: Step 3 of 7: Time and Date
To change these settings later, refer to
Setup, Inverter details, Set Date and Time
.
Step 4 of 7: Installed power
For each PV input, enter
• surface area
• installed power
For more information refer to the Protect PV Reference Manual.
3. Web Server Quick Guide
14 8000038784_00_BAL_en / L00410565-01_02
3
To Next Page
Loading...
