in remote mode each programme and option selection from
extended application list is signalled by symbol on the
display.
Remote control activation
To operate remotely the tumble dryer you must activate this
function on the appliance control panel.
To enable the remote control:
1. Check wireless connection between the appliance and smart
device.
The symbol must be on the display and your appliance must be
accessible from My AEG application.
2. Touch and hold down the Time Dry and Delay Start buttons at
the same time.
The symbol must appear on the display. Remote control is
enabled.
Another possibility to enable remote control is to touch Start/Pause
button. The symbol must
appear on the display. Remote control
is enabled.
Remote control deactivation
To disable the remote control:
Touch and hold down the Time Dry and Delay Start buttons
at
the same time.
The symbol must
disappear from the display. Remote control is
disabled.
19/64
WI-FI - CONNECTIVITY SETUP
To Next Page
Loading...
