Dryness level Display symbol
Extra dryness
Standard dryness
6. To memorise the setting touch and hold down the Dryness and
Anticrease buttons at the same time for approximately 2
seconds.
10.3 Deactivating the tank indicator
The water container indicator is activated by default. It illuminates
at the end of the drying cycle or during the cycle if the water
reservoir is full. If the draining kit is installed the water container is
drained automatically and the indicator can be deactivated.
To deactivate the indicator:
1. Turn the appliance on.
2. Wait approximately 8 seconds.
3. Select 1 of the available programmes.
4. Touch and hold down Anticrease and Time Dry buttons at the
same time.
One of 2 configurations is possible:
• the Tank indicator: is on if the symbol appears - the
water container indicator is permanently activated
• the Tank indicator: is off if the symbol appears - the
water container indicator is permanently deactivated
39/64
HINTS AND TIPS
To Next Page
Loading...
