AEM CD-5FLG User Manual

54
· h - Displays the hours in 12 hour format.
· m - Displays the minutes.
· s - Displays the seconds.
· f - Displays tenths of seconds.
· ff - Displays hundredths of seconds.
· fff - Displays thousandths of seconds (only works for lap time via CAN).
· y - Displays the date in dd-mm-yy format
· z - Displays the date with text for the month, eg 01 Jan 09
Thus, the following formats would display the time in the following manner:
· Hms - 24:00:00
· hmsf - 12:00:00.0
· hmsff - 12:00:00.00
· y - 01-01-09
· hmsz - 12:00:00 01 Jan 09
System information can be shown by adding a value gauge to the screen and setting the Label Format property as
follows:
· vV - Shows the version of the color display firmware.
· vs - Shows the serial number of the display.
· vu - Shows the usage (on time) of the display in hours.
· vr - Shows the reset counter - the number of power on events since the last setup upload.
· vc - Shows the filename of the setup file used to program the display (up to 24 characters).
Bar Gauges
There are four types of bar gauge - rectangle and triangle shaped bars in either horizontal or vertical orientation. A
bar contains a number of resolution lines that divide the bar up between the minimum and maximum limits.

AEM CD-5FLG Specifications

General

Brand	AEM
Model	CD-5FLG
Category	Monitor
Language	English