Need help?Do you have a question about the AEMC 1026 and is the answer not in the manual?
General| Model | 1026 |
|---|---|
| Manufacturer | AEMC |
| Continuity | Yes |
| Diode Test | Yes |
| AC Voltage (V) | 600V |
| DC Voltage (V) | 600V |
| AC Current (A) | 600A |
| DC Current (A) | 600A |
| Accuracy | ±1.5% |
| Display | LCD |
| Operating Temperature | 0° to 50°C |
| Storage Temperature | -20°C to 60°C |
Information regarding NIST traceable certificates for calibration.
Details on the recommended calibration interval for the instrument.
Information on warranty coverage and product registration.
Instructions for returning the instrument for service and contact details.
Essential safety rules for operating the megohmmeter.
Warnings regarding high voltage and potential electrical shock.
Precautions for testing and discharging capacitive samples.
Safety considerations for prolonged tests and explosive environments.
Explanation of the double/reinforced insulation symbol.
Explanation of the caution symbol and manual reference.
Meaning of the electric shock risk symbol on the instrument.
Instructions for checking the contents upon receiving the shipment.
List of items included in the megohmmeter package.
Overview of the Model 1026 megohmmeter's measurement capabilities.
Details on the instrument's display and analog bar indication.
Explanation of the '-OL-' and low battery symbols.
Information on sampling rate and the required power source.
Estimated battery life for different measurement ranges.
Recommended temperature and humidity for operation and storage.
Physical dimensions and weight of the megohmmeter.
Specifications for AC and DC voltage measurement ranges and accuracy.
Specifications for Ohms and continuity testing.
Specifications for Megohm insulation resistance measurements.
Details on voltage output and short circuit current.
Compliance with electrical safety standards like IEC 1010.
Conditions for altitude, indoor use, and pollution degree.
Catalog number for the Model 1026 megohmmeter.
Catalog numbers for optional accessories like test leads and cases.
Overview of the LCD display segments and indicators.
Descriptions of symbols like LOCK, HOLD, Continuity Beeper, and Low Battery.
Identification of the LCD display component.
Identification of the TEST button.
Identification of the rotary function selector.
Identification of the Power Lock button.
Identification of the Data Hold button.
Identification of the Hi and Lo input terminals.
Identification of the battery compartment cover.
Procedure for measuring AC voltage.
Procedure for measuring DC voltage.
Procedure for low resistance and continuity measurements.
Procedure for insulation resistance testing.
How to perform measurements using Manual Mode.
How to perform measurements using the Power Lock Mode.
Handling overload conditions and auto power off feature.
Important warnings before performing maintenance.
Step-by-step guide for replacing the batteries.
Instructions for replacing the internal fuse.
Proper methods for cleaning the megohmmeter.
Information on recommended recalibration intervals.
Contact details and procedures for repair and calibration services.
Contact information for technical problems and assistance.
To Next Page
