Need help?Do you have a question about the AEMC 725 and is the answer not in the manual?
General| Category | Measuring Instruments |
|---|---|
| Model | 725 |
| Manufacturer | AEMC |
| AC Voltage | 600 V |
| DC Voltage | 600 V |
| Data Logging | Yes |
| Harmonics | Yes |
| THD | Yes |
| Bluetooth | No |
| Continuity | Yes |
| Diode Test | Yes |
| Battery Type | 9V |
| Safety Rating | CAT III 600 V |
| Type | Clamp Meter |
| Display | LCD |
| Power | Yes |
| Battery Life | 200 hours |
Detailed electrical parameters including input ranges, accuracy, and reference conditions.
Specifications for AC voltage measurements, including input range, impedance, and frequency.
Specifications for DC current measurements, including input range and basic accuracy.
Specifications for DC voltage measurements, including input range, impedance, and accuracy.
Specifications for Total Harmonic Distortion (THD) measurements.
Specifications for Distortion Factor (DF) measurements.
Specifications for measuring individual harmonic orders.
Specifications for Transformer Harmonic Derating Factor (THDF).
Specifications for Transformer K-Factor Rating.
Specifications for Ripple measurements.
Specifications for Crest Factor (CF) measurements.
Specifications for Frequency (Hz) measurements.
General specifications including dimensions, weight, battery life, and operating conditions.
Details on the materials used for the instrument's case, jaws, and lens.
Mechanical specifications including envelope protection, drop test, and vibration resistance.
Safety standards and protection levels met by the instrument.
Electromagnetic compatibility standards for electrostatic discharge, RF, and transients.
Description of the transformer jaws and their capacity.
Explanation of the main rotary switch for selecting measurement functions.
Function of the lever/trigger for opening or closing the jaws.
Functionality of the HOLD button to freeze readings.
Description of the color-coded voltage input connectors.
Description of the dual liquid crystal display.
Functionality for recording minimum, maximum, and average values.
Functionality of the SMOOTH button for 3-second averaging.
Functionality of the Hz button for frequency measurement.
Functionality of the RANGE button for manual range selection.
Functionality of the HARM button for harmonic measurements.
Specific harmonic measurement modes for individual harmonics.
Functionality of the yellow Shift button.
Indicates True RMS amperes measurement.
Indicates True RMS volts measurement.
Indicates DC volts measurement.
Indicates DC amperes measurement.
Indicates three-second measurement averaging.
Indicates manual range selection.
Indicates the hold function is activated.
Indicates the record mode is activated.
Indicates recording mode interruption.
Indicates the maximum measurement value.
Indicates the minimum measurement value.
Indicates the average measurement value.
Indicates Total Harmonic Distortion percentage.
Indicates Transformer Harmonic Derating Factor.
Indicates Transformer K Factor.
Indicates Distortion Factor percentage.
Indicates percent ripple on DC signal.
Indicates Crest Factor.
Indicates Peak measurement value.
Indicates individual harmonic order.
Indicates odd order harmonics only.
Indicates measurement includes AC and DC components.
Indicates Auto-Off feature disabled.
Analog bar graph for trend measurements.
Indicates input overload condition.
Indicates input signal below range or exceeds safety limits.
How to control the beeper function.
How to select between AC and AC+DC measurement modes.
How to select odd harmonics or all harmonics display.
How to enable or disable the auto power off feature.
How to enable the record clock function.
How to toggle the primary and secondary display locations.
How to view the full function display.
How to reset the instrument to default settings.
Crucial safety guidelines to follow before performing AC voltage measurements.
Step-by-step instructions for performing AC voltage measurements.
Crucial safety guidelines to follow before performing AC current measurements.
Step-by-step instructions for performing AC current measurements.
Crucial safety guidelines to follow before performing DC voltage measurements.
Step-by-step instructions for performing DC voltage measurements.
Crucial safety guidelines to follow before performing DC current measurements.
Step-by-step instructions for performing DC current measurements.
How to toggle between primary and secondary display locations for harmonic analysis.
How to select manual ranges for current (Amps).
How to select manual ranges for voltage (Volts).
Measuring frequencies of individual harmonics in HARM mode.
Explanation of the Peak function for measuring instantaneous values.
Explanation of the Smooth function for stabilizing readings.
To Next Page
