AVG. Average measurement value
%THD % Total Harmonic Distortion
THDF Transformer Harmonic Derating Factor (CBEMA)
K Factor Transformer Derating Factor
%DF % Distortion Factor
% Ripple Percent ripple on DC signal
CF Crest Factor
PEAK Peak (1 ms) measurement with ± sign
H xx Individual harmonic order (Hdc to H25)
ODD Displays odd order harmonics only
Relative time indication for recording function is
activated
AC + DC Measurement includes both AC and & components
Indicates beeper function is activated
Auto-Off feature disabled
Bar Graph Analog bar graph for trend measurements A or V
Display and Error Indications
OL Input overload: > 1500 Vpeak or > 1500 Apeak
- - - Input signal below measurement range
Input exceeds safety, measurement or operating
range. Discontinue measurement and refer to the
specific function and specification section in user
manual.
The primary (larger)/secondary (smaller) display allows dual monitor-
ing of measured values with the selection of the HARM push button.
These locations may also be reversed with: ON & .
▲
To Next Page
Loading...
