Range Push Button: Manual Ranges
The RANGE push button enables you to exit the Auto Ranging mode
and to enter manual ranges. RANGE operates on all measurement
modes. RANGE will be displayed during manual ranging.
In Amps
Pushing the RANGE push button selects a fixed manual range: 60 A first
and 600 A on the second push. The digital display and the bar graph indi-
cate the selected range. RANGE is displayed at the top of the display indi-
cating a manual range selection. Selection is also confirmed with audible
tone.
To sequence back to Auto Ranging, push and hold the RANGE push but-
ton for approximately 3 seconds. The displayed RANGE indicator will dis-
appear, confirmed with an audible tone.
The bar graph ranges are 60 A and 600 A and are also manually selected.
The analog bar graph will continue to display current values while other
measurement functions are displayed (i.e., %THD, %DF, %CF).
In manual range, the ranges (60 A) and (600 A) are extended respec-
tively to 100 A and 1000 A for a better resolution of 1000 counts.
33
Clamp-On Harmonic Probe Model
To Next Page
Loading...
