Aeon Aeotec User Manual (English)

To Next Page

11.7.2017 Home Energy Meter Gen5 user guide. : Aeotec by Aeon Labs

https://aeotec.freshdesk.com/support/solutions/articles/6000161943-home-energy-meter-gen5-user-guide- 1/7

Home Energy Meter Gen5 user guide.

Modified on: Tue, 7 Mar, 2017 at 6:29 PM

Aeotec by Aeon Labs Home Energy Meter Gen5.

Aeotec Home Energy Meter Gen5 has been crafted to power connected lighting using Z-Wave Plus

(http://aeotec.com/z-wave-plus). It is powered by Aeotec’s Gen5 (http://aeotec.com/z-wave-gen5) technology. You can find

out more about Home Energy Meter Gen5 (http://aeotec.com/z-wave-home-energy-measure)by following that link.

To see whether Home Energy Meter Gen5 is known to be compatible with your Z-Wave system or not, please

reference our Z-Wave gateway comparison (http://aeotec.com/z-wave-gateways) listing. The technical specifications

of Home Energy Meter Gen5 (https://aeotec.freshdesk.com/solution/articles/6000168072-home-energy-meter-gen5-

technical-specifications-) can be viewed at that link.

Familiarize yourself with your Home Energy Meter.

Your Home Energy Meter from Aeotec by Aeon Labs is comprised of two parts: the Main Body and Clamps. Once

installed, the meter will sit near your home’s main circuit box, while the clamps are attached to it.

Need help?

Do you have a question about the Aeon Aeotec and is the answer not in the manual?

Aeon Aeotec Specifications

General

Power Source	Battery
Communication Protocol	Z-Wave
Sensors	Motion, Temperature, Humidity, Light
Battery Type	CR123A
Operating Temperature	0°C to 40°C / 32°F to 104°F
Weight	32g