Aeotec MULTISENSOR 6

To Next Page

To Previous Page

29-09-2020 17:00Multisensor 6 user guide : Aeotec Group

Pagina 8 van 13https://aeotec.freshdesk.com/support/solutions/articles/6000057073-multisensor-6-user-guide-

Tips: We suggest you choose the second method (using screws to aﬃx the Back-Mount Arm) would be more stable.

2. After you have completed the aﬃxing of Back-Mount Arm, you will need to lock MultiSensor to the Back-Mount

Arm by screwing MultiSensor in.

3. The Back-Mount Arm may be locked at various angles by turning the Friction Lock clockwise and counter-

clockwise to respectively tighten or loosen the angle of the arm. You can rotate the Friction Lock to change the

measurement area of sensor.

Aeotec MULTISENSOR 6 - Page 8