Aeotec Z-Wave MultiSensor 6 User Manual

16-08-13
MultiSensor Manual - Aeotec
aeotec.com/z-wave-sensor/47-multisensor-manual.html
1/10
MultiSensor
Manual
Unlock the MultiSensor from its battery cover by twisting the
battery cover from the main unit in a counter-clockwise
motion and pulling the battery cover outward to separate the
main unit from the battery cover.
The following instructions have been designed to help you
install and get the best performance out of Aeotec’s Z-Wave
MultiSensor.
Powering The
MultiSensor.
The Aeotec MultiSensor has built-in battery level detection. It
will automatically report its battery level to the associated Z-
Wave gateway throughout its life until the battery is fully
drained and needs replacing. Most gateway user interfaces
will inform you of the battery status.
When used properly in an optimized Z-Wave network,
operation via battery can function for 12 months before
battery replacement.

Aeotec Z-Wave MultiSensor 6 Specifications

General

Brand	Aeotec
Model	Z-Wave MultiSensor 6
Category	Accessories
Language	English

Summary

Powering The MultiSensor

Unlock Battery Cover

Unlock the MultiSensor from its battery cover by twisting counter-clockwise and pulling outward.

MultiSensor Physical Installation

Ceiling Mount: Back-Mount Plate

Mount the MultiSensor flat against the ceiling using the provided back-mount plate.

Angled Mount: Back-Mount Arm

Mount the MultiSensor angled using the back-mount arm for directional placement.

Back-Mount Arm Angle Adjustment

Adjust and lock the back-mount arm angle using the friction lock by turning it clockwise or counter-clockwise.

Adjusting the Sensitivity

Z-Wave Network Instructions

Pairing the MultiSensor to Z-Wave

Include the MultiSensor into a Z-Wave network using a Minimote, pressing 'Include' then the device's Z-Wave button.

Troubleshooting Z-Wave Pairing

Removing the MultiSensor from Z-Wave

Z-Wave Removal Process

Remove the MultiSensor from the Z-Wave network using a Minimote by pressing the 'Remove' button.

Troubleshooting Z-Wave Removal

Monitoring Motion

Monitoring Temperature, Humidity, and Luminance

Important Disclaimer