72
SET TMT 2-3 USE
information includes (Fig. 64):
> Graphics TMT and 2-3 USE.
> Set Point graphic SELF (or bud) flashing.
Pressing and releasing the S button momentarily (< 2
seconds) will toggle between SELF and bud.
Pressing and releasing the A button momentarily (< 2
seconds) will accept the setting and/or advance to SET
TMT 2 with ON or OFF flashing.
Depressing the A and S buttons simultaneously for 2
seconds shall save the setting and revert back to the SET U
screen.
Depressing and holding the M button for 2 seconds or if no
button is pressed for a period of 2 minutes operation will
revert to the NORM or GAUG SURF MAIN screen.
When set for SELF, TMT 2 and TMT 3 are associated with
Transmitters to be used by a diver using the EPIC for Gas Switch-
ing.
When set for BUD, TMT 1 is associated with the user of the EPIC
and TMT 2 and TMT 3 are associated with Transmitters to be
used by other divers (Buddies) whose Pressure can be checked
by the user of the EPIC.
Fig. 64 - SET TMT 2-3 USE
To Next Page
Loading...
