AERMEC ANL 025 User Manual

1608. 6755441_02
INSTALLATION MANUAL
CHILLERS
REVERSIBLE HEAT PUMPS
CONDENSING UNITS
• EXTERNAL UNITS
• HIGH EFFICIENCY
• HOT WATER PRODUCTION UP TO 50 °C
Aermec
participates in the EUROVENT Programme: LCP.
The products of interest can be found on:
www.eurovent-certification.com
EN
ANL
ANL-H
020-202

AERMEC ANL 025 Specifications

General

Brand	AERMEC
Model	ANL 025
Category	Chiller
Language	English

Summary

1. General Instructions for the Installer

1.2. Safety Instructions and Installation Standards

Install by qualified technician, follow local laws, take precautions, and read manual.

2. Selection and Position of Installation

2.2.1. Positioning

Agree location with client, ensure base support, respect safe distances, install by qualified technician.

5. Electrical Connections

Mandatory Requirements

Key requirements for electrical connections like circuit breaker, earthing, and phasing.

8. Checks and First Start-Up

Start-Up Procedures

Checks with Unit Running

Verify compressor current, noise, voltage, leaks, superheat, and discharge temperature.

Safety and Control Devices Check

Check high pressure pressostat, anti-freeze protection, and other safety features.

9. Operating Characteristics

Alarm Conditions

10. Routine Maintenance

Hydraulic Circuit Checks

Electric Circuit Checks

Refrigerant Circuit Checks

Checks for heat exchanger efficiency, compressors, pressures, leaks, and filter drier.

11. Special Maintenance

13. Procedure for Selection of System Type

System Configuration Questions and Answers