AERMEC ANL 040 - User Manual

1608. 6755441_02
INSTALLATION MANUAL
CHILLERS
REVERSIBLE HEAT PUMPS
CONDENSING UNITS
• EXTERNAL UNITS
• HIGH EFFICIENCY
• HOT WATER PRODUCTION UP TO 50 °C
Aermec
participates in the EUROVENT Programme: LCP.
The products of interest can be found on:
www.eurovent-certification.com
EN
ANL
ANL-H
020-202

AERMEC ANL 040 Specifications

General

Brand	AERMEC
Model	ANL 040
Category	Chiller
Language	English

Summary

General Instructions for the Installer

Conservation of Documentation

Instructions for preserving the manual and supplementary documentation for future reference by the system user.

Safety Instructions and Installation Standards

Emphasizes professional installation by qualified technicians and adherence to safety precautions and applicable regulations.

Selection and Position of Installation

Positioning

Guidance on lifting units, verifying lifting capability, and positioning them correctly on a stable base with adequate access.

Electrical Connections

Checks and First Start-Up

Operating Characteristics

Routine Maintenance

Hydraulic Circuit

Annual checks for the hydraulic circuit, including water filling, filter cleanliness, and flow rate constancy.

Electric Circuit

Annual checks for the electric circuit, focusing on safeties, voltage, power input, and terminal tightness.

Refrigerant Circuit

Annual checks for the refrigerant circuit, including heat exchanger efficiency, compressor state, and leak detection.

Mechanical Checks

Annual checks on mechanical aspects like screw tightness, unit structure, and corrosion treatment.

Special Maintenance

Disposal

Procedure for Selection of System Type

How to Modify a User Menu Parameter

Step-by-step guide to access and modify parameters within the USER menu using the control board.

How to Modify an Installer Menu Parameter

Step-by-step guide to access and modify parameters within the INSTALLER menu using the control board.