AERMEC ANL 030 User Manual

1608. 6755441_02
INSTALLATION MANUAL
CHILLERS
REVERSIBLE HEAT PUMPS
CONDENSING UNITS
• EXTERNAL UNITS
• HIGH EFFICIENCY
• HOT WATER PRODUCTION UP TO 50 °C
Aermec
participates in the EUROVENT Programme: LCP.
The products of interest can be found on:
www.eurovent-certification.com
EN
ANL
ANL-H
020-202

AERMEC ANL 030 Specifications

General

Brand	AERMEC
Model	ANL 030
Category	Chiller
Language	English

Summary

INSTALLATION MANUAL

GENERAL INSTRUCTIONS FOR THE INSTALLER

Standards Applied

Safety Instructions and Installation Standards

Crucial safety guidelines and compliance requirements for qualified installers.

SELECTION AND POSITION OF INSTALLATION

Positioning Guidelines

Details on lifting, moving, placing the unit, and ensuring proper clearance and base support.

SYSTEM CHARGING AND DRAINING

System Charging Procedure

Step-by-step guide for charging the system, including safety warnings and checks.

System Draining Procedure

Steps for draining the system water, including valve operations and vent checks.

ELECTRICAL CONNECTIONS

Mandatory Requirements

CHECKS AND FIRST START-UP

Preparing for First Start-Up

Preliminary Checks Before Powering Up

Checks After Powering Up

Verifying power supply, connections, and compressor crankcase heater operation.

ROUTINE MAINTENANCE

Hydraulic and Electric Circuit Checks

Refrigerant Circuit Checks

PROCEDURE FOR SELECTION OF SYSTEM TYPE

Modifying Menu Parameters