Need help?Do you have a question about the AERMEC ANL 021 and is the answer not in the manual?
Details compliance with various EU directives and harmonized standards for the product.
Declaration of incorporation for compliance with the EU Machinery Directive 2006/42/CE.
Safety measures to mitigate mechanical, electrical, chemical, and thermal hazards during operation.
Guidelines for safe transport, lifting, and initial inspection of the unit upon receipt.
How to identify the unit using packaging labels and technical plates.
Recommendations for storing the unit, including maximum temperature limits.
Instructions for unit positioning, base requirements, and mounting to prevent vibrations.
Diagrams showing dimensions and hydraulic connection locations for ANL 021-041 units.
Diagrams showing dimensions and hydraulic connection locations for ANL 050-090 units.
Diagrams showing dimensions and hydraulic connection locations for ANL 102-202 units.
Diagrams showing dimensions and hydraulic connection locations for ANL 021-041 Version A.
Diagrams showing dimensions and hydraulic connection locations for ANL 050-090 Versions A/Q.
Diagrams showing dimensions, hydraulic connections, and pipe sizes for ANL 021-041 Version C.
Diagrams showing dimensions, hydraulic connections, and pipe sizes for ANL 050-090 Version C.
Diagrams showing dimensions, hydraulic connections, and pipe sizes for ANL 102-202 Version C.
Diagrams showing dimensions and hydraulic connection locations for ANL 050-090 Versions D/DA.
Diagrams showing dimensions, hydraulic connections, and system details for ANL 102-202 Versions D/DA.
Table detailing weight, centre of mass, and load distribution on supports for various models.
Diagrams and table specifying minimum clearances for unit installation, access, and airflow.
Procedures and precautions for protecting the unit from freezing using glycol solutions.
Table listing essential water quality requirements for heat exchangers.
Diagram illustrating the standard internal and external hydraulic circuit for ANL units.
Diagram illustrating the internal and external hydraulic circuit for ANL P/N units.
Diagrams illustrating hydraulic circuits for ANL A/Q units of different sizes.
Information on electrical specifications, cable sizing, and connection requirements.
Detailed table of electrical data, power supply, and recommended cable cross-sections.
Step-by-step guide for connecting the unit to the main power supply safely and correctly.
Example layout of the electrical panel for units with single-phase 230V power supply.
Example layout of the electrical panel for units with three-phase 400V power supply.
Example layout of the electrical panel for Version A units with single-phase 230V.
Example layout of the electrical panel for Version A units with three-phase 400V.
Wiring diagrams and connection points for standard auxiliary devices to the control board.
Wiring diagrams and connection points for auxiliary devices with the evaporator less option.
Essential checks and safety measures required before starting the unit.
Steps and checks for operating the unit once it is powered on.
Safety measures, PPE, and precautions required for performing maintenance tasks.
Measures to prevent chemical, fire, environmental, and pressure risks during maintenance.
Schedule of general maintenance tasks, checks, and cleaning intervals.
Periodic checks for cooling circuit components, compressors, and hydraulic systems.
Procedures for the safe and environmentally responsible decommissioning and disposal of the unit.
To Next Page
General
