AERMEC HRC - Input Fan Power Page; Expulsion Fan Power Page; Password Page

To Next Page

To Previous Page

5.4 INPUT FAN POWER PAGE

This parameter identies the functioning power (expressed as a percentage) of the input fan during the Manual and AUX functioning mode.

To enter the modication mode, press the key (the entire data

modication phase is highlighted by the ashing of the icon ), change the value using the keys

and conrm the selection by pressing

Bargraph of the power

of the supply fan

(min 1 spet, max 20 steps)

5.5 EXPULSION FAN POWER PAGE

This parameter identies the functioning power (expressed as a percentage) of the expulsion fan during the Manual and AUX functioning mode.

To enter the modication mode, press the key (the entire data

modication phase is highlighted by the ashing of the icon ), change the value using the keys o

and conrm the selection by pressing

Bargraph of the power of the

expulsion fan (min 1 spet,

max 20 steps)

5.6 PASSWORD PAGE

The user can access the submenu parameters through the password setting (see gure below)