AERMEC HRC - USER Menu; INSTALLER Menu

20
PASS: 0 PASS: 3 PASS: 11 PASS: 1
USER
menu
INSTALLER
menu
ASSISTANCE
menu
°C/°F CHOICE
menu
Note:
to modify all the parameters present in the user interface rmware, simply follow the sequence of operations shown in the gure:
Activate data
modification mode
Set value Confirm data
5.7 USER MENU
5.7.1 SEA Parameter
This parameter is used to select the functioning season of the heat recovery unit.
Where:
— SEA = 0 → Summer functioning
— SEA = 1 → Winter functioning
5.7.2 SPH Parameter
This parameter represents the room temperature set desired in the rooms during the winter functioning. This data is used in the function that manages the activation of the
post-treatment resistance.