EasyManua.ls Logo

AERMEC NRK 0200 - Operational Limits; Cooling Mode Operating Limits; Heating Mode Operating Limits

AERMEC NRK 0200
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21Aermec cod.
5167556_03 17.09
NRK 0200-0700
-15
-10
-5
0
5
10
15
20
25
30
35
40
45
48°C
48°C
40°C
50°C
2 3 4 5 6 7 8
9
10 11 12 13 14 15 16
17 18
19°C
8. OPERATIONAL LIMITS
Nota:
 




In these conditions, operation is only allowed for a short
mount of time and to bring the system to the proper tem-
perature.
To shorten this operation, it is recommended to install a
three-way valve which makes it possible to bypass the water
from the utilities to the plant, until achieving conditions
which allow the unit to work within the allowed operating
limits.
8.1. COOLING MODE ¹
The units, in standard configuration, are not suitable
for installation in salty environments.
For functioning limits, please refer to the diagrams,

8.2. HEATING MODE ¹
External air temperature d.b.°C
Produced water temperature EVAPORATOR°C
0
5
10
15
20
25
30
35
40
45
50
55
65°C
60
65
70°C
-15-20-25
-10
-5 0
20 25 30 35 40
45°C
10 15
42°C
External air temperature d.b.°C
Produced water temperature
CONDENSER °C
ATTENTION
In windy areas, for correct opera-
tion of DCPX it is recommended to
install a windbreak barrier.


ATTENTION
Contact our technical
sales department if the
unit needs to operated
outside the operating limits.

Related product manuals