21
This menu is active if the clock board has
been enabled (see manufacturer menu)
Used to display and modify the following
parameters:
• time
• date
• day of the week
• programming timer and time bands
for each day of the week
ON
ZONE 1
Start00:00 23:59StartStop Stop
ZONE 2
OFF
If enabled, the weekly time band timer enables setting up of two 2 operating zones for each day of the week as
illustrated in the drawing (when a zone has the same start and stop time, it is disabled):
Modifies day of the week and
times Zone 2
3.3.
Clock menu
Clock menu
Da y MONDAY ZONE 2
Start Stop
00:00 00:00
enter
Display and modification of time, date
and day of the week parameters
Enabling weekly timer and time bands (Y =
enabled, N = disabled)
Modifies day of the week and
times Zone 1
Enable weekly
time zones N
Da y MONDAY ZONE 1
Start Stop
00:00 00:00
enter
Clock conf ig.
Ti me 18: 15
Dat e 14/11/05
Day TUESDAY
To Next Page
Loading...
