AERMEC REMOTE HANDSET - Night-Time Comfort Function

14
NOTE
The night-time comfort function is deactivated by
switching off the unit; it will not be active when
the unit is restarted. It can be activated at any
moment during the day.
The night-time comfort function controls the air
conditioner in an optimal way during the night. The
following logic is applied:
• In cooling or dehumidification: the temperature
set-point is gradually increased (no more than +3°C)
to guarantee maximum comfort combined with
energy savings.
• In heating: the temperature set-point is gradually
decreased (no more than -3°C) to guarantee
maximum comfort combined with energy savings.
If the unit is ON (and automatic or ventilation-only
mode is not selected), press SLEEP button to activate
or deactivate the night-time comfort function. If this
function is active, the icon will be displayed on the
remote control.
ACTIVATING / DEACTIVATING THE NIGHTTIME
COMFORT FUNCTION
Setting the night-time
comfort function
F
A
N
M
O
D
E
ON/OFF
SAVE
HEATCOOL
TIMERQUIET
SLEEP
LIGHT
X-FAN
E-HEATER
WiFi