For the very latest specifications visit www.aeroflex.com
Application
Note
Testing live EDACS repeater stations is made quick and
easy using the IFR 2945B Communications Service
Monitor. A step by step guide to a typical measurement
application
EDACS repeater testing using the
IFR 2945B Communications Service
Monitor
Introduction
The IFR 2945B Communications Service Monitor is ideal-
ly suited to the testing of trunking repeaters. It provides
an extensive array of tests, allowing verification of per-
formance, and rapid diagnosis of faults.
This application note will assist the first time users by lead-
ing them through the initial stages in setting up the 2945B
and testing an EDACS repeater.
The majority of this document is concerned with using the
2945B test set off-air, that is with no physical connection
to the repeater. The limitations of this method will be
explained, but the method does allow rapid set up and
quick verification.
To Next Page
Need help?
General
