EasyManuals Logo

Aerofy HD2 User Manual

Aerofy HD2
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
3
Cleaning and Maintenance
Cleaning unit
Clean the water tank
Clean the air filter
When not using dehumidifier for long time periods
1. Wipe the surface with a soft cloth, and wipe the control panel with a dry
cloth. Do not clean it directly with water.
2. Do not disassemble the float, and thoroughly remove the remaining water
in the float, otherwise the float will not float normally.
1. Use a soft cloth to clean the inside of the water tank.
Remove the air inlet grille from the back of the dehumidifier. Use a hand-tool
on a vacuum cleaner (such as a brush) to clean the dust from the filter or wash
in soapy water. Ensure the filter is dry before replacing.
1. Unplug the plug, drain the remaining water in the water tank, wipe it dry
and store it.
2. Put the power cord away and store the unit upright, away from direct sunlight.
2. Stubborn dirt should be moistened with a soft cloth with a neutral detergent,
wring it out, and then wipe it.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Aerofy HD2 and is the answer not in the manual?

Aerofy HD2 Specifications

General IconGeneral
BrandAerofy
ModelHD2
CategoryDehumidifier
LanguageEnglish