7
In the standby state, press this button to set the timing power-on time
(0-24 hours). When the unit is running, press this button to set the scheduled
shutdown. Set to "00" to cancel the timing. After the timing is set and
completed, the timing indicator light is always on during the timing, and it will
automatically turn off after the timing ends.
In the running state, set the timing time as the timing shutdown time.
In the standby state, set the timing time as the timing start time.
Touch the sleep button, the button light will light up, and the sleep function
will be started. After no operation, all indicator lights gradually dim, and the
fan speed automatically switches to low fan speed. Touch any button to call
up the indicator light. Touch the sleep button again to exit the sleep function.
Cycle through sunny mode - rainy mode - drying mode, touch to switch the
mode, and the corresponding indicator will light up.
Cycle through high fan speed - low fan speed, touch to switch, the
corresponding indicator light will light up. The fan speed cannot be switched
during the drying mode, sleep function, and defrosting period.
Long touch the fan speed button for 3 seconds to turn on/off the child
lock function.
Sunny Mode: Run with the target humidity as 60% by default, and the target
humidity can be adjusted.
Rain Mode: Run with the target humidity as 40% by default, and the target
humidity can be adjusted.
Drying Mode: The machine runs continuously, and the target humidity cannot
be adjusted.
Timer Button
Sleep button
Mode button
Fan speed / Child lock button
To Next Page
Loading...
Need help?
General