AE
AT I
N
AEROMIX Aeration Products:
Rugged Solutions in Water and Wastewater
AEROMIX is a world leader in water and wastewater treatment equipment. With decades of proven reliability
and unique installations in 75 countries, AEROMIX equipment is depended upon by prominent organizations
across the globe, including the U.S. Army Corps of Engineers, Contrack International, Haliburton, Coca-Cola,
and numerous others. AEROMIX offers full lines of treatment systems, aeration equipment and solar powered
equipment. Please visit www.aeromix.com to learn more about AEROMIX Systems.
Rental units available. Covered by United States Patent Nos. 5,160,667 - 4,741,870 - 5,868,091 - 7,048,260B2 - 5,183,596 - 6,634,626B2 - 5,762,833 -
D324,279. © 2010, AEROMIX Systems, Inc.
AEROMIX Systems, Inc.
7135 Madison Ave. West
Minneapolis, MN 55427 U.S.A.
Ph: 800-879-3677, 763-746-8400
Fax: 763-746-8408
e-mail: aeromix@aeromix.com
web: www.aeromix.com
To learn more about the AEROMIX aeration solution best suited for your application, call 800-879-3677 or visit www.aeromix.com
TORNADO
®
Aerator
• Self-Aspirating and Blower Assisted models available
• Available from 2 to 100HP (1.5 to 75 kW)
• All stainless steel construction, grease lubricated
bearings, and solid shaft vibration-free design
• Ideal for activated sludge basins, sludge holding
tanks, oxidation ditches, lagoons, ice control, and
post aeration applications
HURRICANE
®
Aerator
• Submersible Aspirating Aerator/Mixer
• Available from 5 to 100HP (3.75 to 75 kW)
• Customized air diffuser lengths for most efficient
aeration and mixing
• Effective in aerobic digesters, sludge holding tanks,
ow equalization tanks, sequencing batch reactors,
and post aeration
ZEPHYR
®
IAF System
• Induced Air Flotation (IAF) System
• Available from 1 to 10HP (.75 to 7.5 kW)
• Stainless steel construction
• Separates and removes fats, oils, and otable solids
• Applied at pulp and paper mills, petrochemical,
meat, vegetable and oil processing facilities
CYCLONE
®
Diffuser
• Coarse Bubble Diffusers
• Unique bubble shearing action for high oxygen
transfer efficiency
• Stainless steel construction
• Perfect for activated sludge basins, aerobic
digesters, aerated grit chambers, sludge storage
tanks, basin channels, and post-aeration basins
TWISTER
®
Aerator
• Low Speed Surface Aerator
• Available from 2 to 150HP (1.5 to 112 kW)
• Intense air-to-water mixing for high oxygen transfer
• Wear resistant and durable construction
• Ideal for highly loaded basins, oxidation ditches,
leachate treatment and activated sludge applications
TYPHOON
®
Aerator
• Floating High Speed Aerator
• Available from 2 to 200HP (1.5 to 150 kW)
• High pumping rates with a low trajectory for intense air-
to-water mixing and excellent oxygen transfer rates
• Minimal maintenance required
• Perfect for high rate aeration applications in basins and
lagoons
RIPTIDE
®
Mixer
• Direct Drive Surface Mixer
• Available from 2 to 30HP (1.5 to 22.5 kW)
• Directional mixing just below the surface for high basin
mixing efficiency
• Weedless design propeller
• Used in industrial applications for wastewater treatment
MONSOON
®
Aerator
• Floating Paddlewheel Aerator
• Available from 2 to 40HP (1.5 to 30 kW)
• High oxygen transfer and strong horizontal mixing
• 100% stainless steel construction for the ultimate
corrosion resistance
• Effective in lagoons, oxidation ditches, and equalization
basins
Aeromix Class 1 Tornado Aspirating Aerator - Installation Operation Maintenance - Vendor Manual
To Next Page
Loading...