Need help?Do you have a question about the AeroWorks 50cc EXTRA 300 ARF-QB and is the answer not in the manual?
Crucial warnings about R/C aircraft operation and potential hazards.
Overview of the aircraft's capabilities and recommended pilot experience level.
Lists all parts included and essential items needed for assembly.
Instructions for tightening and re-shrinking the model's covering.
Detailed instructions for building the wings and installing aileron servos/linkages.
Guide for assembling the horizontal stabilizer and elevators with servos.
Procedure for installing the rudder and its pull-pull cable control system.
Step-by-step guide for fitting the steerable tail wheel assembly.
Instructions for mounting the main landing gear struts and wheel pants.
Process for securely mounting the 50cc engine to the aircraft firewall.
Guide for installing either the canister or tuned pipe exhaust system.
Installing servos and linkages for engine throttle and choke control.
Mounting and connecting the ignition module, battery, and switch.
Assembling and installing the fuel tank, lines, and filter.
Installing the receiver, battery, switch, and antenna system.
Instructions for mounting and trimming the engine cowl for proper fit.
Final steps to prepare the aircraft for flight, including wing mounting.
Guidance on applying the model's decals for a finished appearance.
Critical procedures for setting CG and control surface deflections.
How to balance the model for optimal flight characteristics.
Setting and verifying control surface throws for different flight rates.
Essential pre-flight inspection points and a reference for control throws.
To Next Page
General