AeroWorks 30cc EXTRA 300 ARF-QB User Manual

1
30cc EXTRA 300 ARF-QB
(Quick Build)
ASSEMBLY MANUAL
AEROWORKS
4903 Nome Street, Denver, CO. 80239 - Phone 303-371-4222 - Fax 303-371-4320
E-mail - info@aero-works.net

AeroWorks 30cc EXTRA 300 ARF-QB Specifications

General

Construction	Balsa and plywood
Covering	UltraCote
Engine	30cc gas
Radio	4 Channel
Servos	5 servos
Skill Level	Intermediate/Advanced

Summary

Kit Contents

Hardware Needed to Complete

Building Accessories Needed to Complete

Checking Hinges for Proper Throw

Checking Glue Joints

Wing Assembly

Aileron Servo Installation

Instructions for installing the aileron servos and connecting control linkages.

Stab and Elevator Assembly

Elevator Servo Installation

Steps for installing the elevator servos and connecting control linkages to the stabilizer.

Pushrod / Control Horn Installation

Guidance on assembling and installing pushrods and control horns for the elevator and stabilizer.

Rudder and Pull – Pull Cable Assembly

Rudder Installation

Rudder Horn, Pull-Pull Cable and Servo Installation

Main Landing Gear and Wheel Pant Assembly

Main Landing Gear Installation

2 Stroke Engine Installation

Throttle servo installation for 2 stroke engine

4 Stroke Engine Installation

Throttle Servo Installation For 4 Stroke Engine

Gas Engine Installation

Engine Installation

Procedure for installing a gas engine, including cowl alignment and template use.

Throttle Servo and Choke Installation

Ignition Installation

Fuel Tank Assembley and Installation for Glow Engine

Fuel Tank Assembly and Installation for Gas Engine

Radio Installation

Cowl Installation for Gas Motors

Cowl Installation Glow Motor

Electric Motor, Battery and ESC Installation

Pre-Flight Preparation

Center Of Gravity– CG Buddy

Center of Gravity - Control Throws

Preflight Checks