Need help?Do you have a question about the AeroWorks 30cc EDGE 540 ARF-QB and is the answer not in the manual?
General| Weight | 9.5 - 10.5 lb (4.3 - 4.8 kg) |
|---|---|
| Radio System | 4+ channel |
| Construction | Balsa and plywood |
| Covering | UltraCote |
| Engine Size | 30cc gas engine |
| Skill Level | Intermediate |
| Servos | 5 high torque servos |
Manual reading and part inspection before assembly.
Outlines warranty terms, conditions, and limitations for the kit.
Specifies hardware for gas, glow, and electric engine installations.
Details servo requirements and hardware for flight controls.
Lists components for receiver power, ignition, and extensions.
Step-by-step guide for installing servos for the ailerons.
Details connecting pushrods and control horns for the aileron surfaces.
Guide for installing servos for the elevator control surfaces.
Details for assembling and installing pushrods and control horns for elevators.
Step-by-step instructions for installing hinges and the rudder to the fin.
Details on assembling rudder control horns, cables, and servo linkage.
Detailed steps for mounting the main landing gear strut to the fuselage.
Installing throttle servo, pushrod, and muffler for the 2-stroke engine.
Installing the throttle servo and pushrod for the 4-stroke engine.
Guide for installing a gas engine, including template use and mounting distance.
Installing throttle servo, choke linkage, and fuel tank for gas engines.
Explains CG Buddy's fixed setting and the importance of balancing the model.
Methods for measuring and adjusting the aircraft's center of gravity for flight.
Explains how to measure control throws and provides a deflection table.
Comprehensive checklist of essential checks before flying the aircraft.
To Next Page