Need help?Do you have a question about the AeroWorks 30cc BRAVATA ARF-QB and is the answer not in the manual?
Details manufacturer's warranty terms and conditions.
Lists required engine components and optional purchases.
Recommends Hitec servos for sport and unlimited performance.
Recommends a 6 or 8 channel receiver for optimal mixing.
Reinforce all glue joints with thin CA for durability.
Apply thin CA to firewall joints for fuel proofing.
Guides on aligning and epoxying servo mounting blocks.
Steps for installing servos using mounting screws.
Instructions for preparing and attaching the servo mounting plate.
Instructions for marking and drilling for hardwood mounting blocks.
Instructions for threading clevis and ball links onto pushrods.
Steps for epoxying and securing the stabilizer with clamps.
Instructions for epoxying the stab reinforcement strips.
Steps for epoxying and attaching the rudder.
Lists components and tools for elevator servo installation.
Lists parts for elevator linkage assembly.
Guides on routing and securing the pull-pull cables.
Guides on adjusting the tension of the pull-pull cables.
Instructions for bolting the landing gear strut to the fuse.
Lists components needed for engine installation.
Steps for drilling mounting holes in the firewall.
Instructions for mounting the engine using bolts and Loctite.
Lists components for ignition module installation.
Guides on positioning the ignition module and drilling mounting holes.
Lists components for throttle servo installation.
Steps for installing the throttle servo and its mounting tray.
Instructions for marking and drilling holes for the throttle servo mount.
Instructions for marking and drilling holes for the throttle pushrod.
Steps for mounting the throttle servo to the motor box.
Instructions for soldering fuel barbs to the fuel pick up tube.
Lists components for fuel tank installation.
Guides on using a template to mark muffler exit holes.
Steps for cutting the muffler exit openings using a template.
Lists components for radio installation.
Steps for attaching the wings to the fuselage.
States CG location and introduces the CG Buddy tool.
Guides on installing the CG Buddy on the wing and fuse.
Steps for balancing the airplane using the CG Buddy.
Emphasizes safe handling and charging of Li-ion batteries.
To Next Page
General