Time Restricted Keypad Pin Codes
Up to 20 codes can be added which will only operate during
pre-set times and days of the week. This is useful to
improve security by giving pin codes which will only work
during desired hours and days of the week.
Permanent Codes (2G or 3G device)
Add a new code (up to 4 digits)
Enter 1 for the main output relay, or 2 for the
secondary output (ask your installer if this is
being used)
Can be 1 to 9999 seconds (2.7 hours).
For Automatic Gates
Enter 0 for a latching code (hold open).
Enter 1 sec to trigger normally.
Enter 3600 for a 1 hour hold open code.
Note: Latching and hold open only work for
selected types of gate installs (ask your
installer).
For Strike Locks enter 1 sec, mag locks 7
secs
Add a new code (up to 4 digits)
Select the days during which the pin code
should work, and between which times. Note:
Enter time in 24 hr military format with no
colons.
E.g. 9am = 0900. 5pm = 1700.
Press Save to send SMS (iphone users must
also confirm from SMS screen).
To Next Page
Loading...
