AES i-Gate 100 User Manual

V1 Page 1
Installation Manual
for
i-GATE 100
GSM Cellular Gate opener and GSM alarm signalling device.

AES i-Gate 100 Specifications

General

Brand	AES
Model	i-Gate 100
Category	Gate Opener
Language	English

Summary

SIM Card Setup and Requirements

Wiring and Connections

General Programming

Check Reception Level

Programming as Gate/Door Opener

Country Code Configuration

Explains how to set the country code for proper operation.

Adding Caller ID Numbers

Instructions for adding phone numbers to the access control memory.

Installing as Gate/Door Opener

Enclosure and Placement

Advice on enclosure rating and optimal placement for reception.

External Antenna Usage

Programming as Alarm Dialler

Connecting Input Triggers

Explains how to connect input triggers from alarm systems or sensors.

Setting Dialling Numbers

Instructions for setting telephone numbers to be dialled when an alarm occurs.

Complete List of Parameters

Changing Pass Codes

Details parameters for changing programming and access control pass codes.

Timings Configuration

Caller ID Features

Using the Device as Gate/Door Opener

Triggering Output via Call

Controlling Output via SMS

SMS commands for triggering, latching, and unlatching the output.

Using the Device as Alarm Dialler

Alarm Activation Call Sequence

Output Control via Alarm Commands

Troubleshooting Guide

No Power / No LEDs

Troubleshooting steps for power supply and LED issues.

GSM LED Flashing Rapidly

Diagnosing network detection problems and SIM card issues.

Call Timing Issues

Caller ID Not Working

Key Input Not Working

Relay Not Triggering

Unit Not Making Calls

Technical Assistance Options

Direct Contact with Service Desk

The quickest method for support via email with detailed problem description.

Product Return for Faults