AFG 18.1AXT - Page 14

15
ASSEMBLY STEP 6
A Open HARDWARE FOR STEP 6.
B Attach each FOOTPAD to the footpad support
on each LINK ARM using 4 BOLTS (K) and 4
WASHERS (L).
C Repeat on opposite side.
WASHER (L)
18 mm
Qty: 8
BOLT (K)
12 mm
Qty: 8
BOLT (C)
16 mm
Qty: 2
WASHER (P)
38 mm
Qty: 2
WAVY WASHER (M)
34 mm
Qty: 2
HARDWARE FOR STEP 6:
BOLTS (K)
WASHERS (L)
LINK ARM
FOOTPAD