7. Press the [OK] key.
8. Press [Details].
9. Select [Fax Settings] using [ ] or [ ], and then press the [OK] key.
10. Enter again the item to be changed.
11. Press [End].
12. Press the [OK] key.
13. Press the [User Tools/Counter] key.
• To change the name, see "Registering Name".
• p.228 "Registering Names"
Using a fax destination as a sender
Following describes the procedure for using a fax number as the sender (sending number).
5. Registering Addresses and Users for Facsimile/Scanner Functions
254
To Next Page
Loading...
