Aficio MP 171SPF - Page 302

10. Select [FTP] using [ ] or [ ], and then press the [OK] key.
11. To change the server name, enter the new server name, and then press the [OK] key.
Otherwise, just press the [OK] key.
12. To change the port number, enter the new port number, and then press the [OK] key.
Otherwise, just press the [OK] key.
13. To change the path, enter the new path, and then press the [OK] key.
Otherwise, just press the [OK] key.
14. Press [Com.Test] to check the path is set correctly.
15. Press [Exit].
5. Registering Addresses and Users for Facsimile/Scanner Functions
300
5