engaging.
5. Make a check of all the buttons functions on the handlebar.
6. Switch off the main key switch. Your Breeze C is now ready to
drive.
The user should know his weight and all other loads are lower than
the maximum of 135 Kg (297 lbs) / 150 Kg (330 lbs) depend on the
model.
If not sure it should be measured.
To transport the Breeze C in a motor vehicle , the Breeze has to be
secured while traveling .
The Foot rest of the Breeze C should be tie down (6) to the motor
vehicle floor with a suitable restrain belts and tight systems.
The Rear part of the Breeze C should be tie down (7) as at the 2
Yellow Marks at the rear part of the Breeze-in the lower part of the
power unit .
The tie/restrain system should be with similar components and
securing ,like the ones used in standard cars fasten belt.
Warning : When transporting the Breeze C , never use it for any
one to be seated on the scooter.
Figure 8
To reduce the height of the Breeze C while transporting it, The seat
can be removed as explained in chapter 3: maintenance. And as
well the Tiller can be folded to horizontal position.
To Next Page
Loading...
Need help?
General
