Afikim Breeze-C User Manual

25
CHAPTER 6 – CHARGING
Read Charger’s manual before using the charger.
Warning: If you use a different charger, ask your dealer for instructions.
CHARGING BATTERIES (See figure 9)
1. Insert first the Charging Plug (8) to the Charging Socket (10) located at the right side of
the tiller box.
2. Plug the power cord (9) of the charger into a wall outlet (11).
3. When charging is completed and you are ready to go - unplug the charger cord (9) from
the wall outlet (11) and then remove the charger plug (8) from the Breeze charging socket
(10).
4. In ideal storage conditions, batteries which were charged to full capacity and were not
used should be recharged every 6 months.
5. If you are planning not to use your Breeze C for an extended period of time, we
recommend charging it for two days and then disconnecting the batteries.
6. If you have not used your Breeze C for an extended period of time, charge the batteries
for at least 24 hours before driving.
 Note: There is NO need to disconnect the Charging Plug promptly after the
charging is complete.
 However, DO NOT leave the Charger connected to the batteries FOR MORE
THAN TWO WEEKS.
 As long as the Charging Plug is in the Charger Socket, the electronic control of
the Breeze automatically cuts all power to the electric system and the Breeze
cannot be driven.
 The charger supplied is suitable for charging Lead Acid Dry/Gel batteries .Only
the defind type of charger should be used. Using any other type of charger
should be approved by your Dealer / Supplier.
Figure 9

Afikim Breeze-C Specifications

General

Brand	Afikim
Model	Breeze-C
Category	Scooter
Language	English