Need help?Do you have a question about the AFL M310 and is the answer not in the manual?
General| Brand | AFL |
|---|---|
| Model | M310 |
| Category | Measuring Instruments |
| Language | English |
Identifies and describes the controls, indicators, and ports on the OTDR's top panel.
Identifies and describes the controls, indicators, and ports on the OTDR's side panels.
Summarizes the use and function of each key on the OTDR's front panel.
Details how to navigate and adjust general settings like language, date/time, units, and system information.
Guides the user through creating new jobs, folders, jobs, end locations, cables, and operator names.
Describes the core settings common to all OTDR test modes in Full Auto mode.
Details how to set parameters like Wavelength, Range, Pulse Width, and Resolution in Expert mode.
Explains how to set default or user-defined Pass/Fail thresholds and provides threshold charts.
Details the steps to access the Results Manager and navigate to view specific test results.
Explains how to start and stop an OTDR test, and describes the status indicators in the OTDR page header.
Provides a step-by-step guide on performing an OTDR test, including reviewing settings and starting the test.
Explains the process of saving test results, including the Save and Save-As functions.
Describes the Front Panel and First Connector Check features for assessing connection quality and provides corrective action suggestions.
Details the features of the LinkMap viewer, including test status, file name, battery indicator, and overall trace view.
Further explains LinkMap viewer features, including event icons, selected event details, and navigation.
Explains the features of the Trace Viewer, including trace display, cursors, test settings, and results fields.
Continues explaining Trace Viewer features like test status, wavelength field, file name, battery indicator, and viewer tabs.
Guides users on viewing results in the Trace Page, including selecting wavelengths, directions, and adjusting zoom/LSA.
Explains how to view results in the Event Table, including selecting wavelengths, directions, and navigating events.
Guides users on viewing results in the Summary Page, including selecting wavelengths, directions, and switching column sets.
Details the steps for fault locating using the Full Auto mode, including connecting cables and pressing test.
Guides the user through testing a cable in one direction and saving the results for bi-directional analysis.
Guides the user through testing a cable in the opposite direction and saving results for bi-directional analysis.
Explains how to view trace results for bi-directional tests, including selecting directions and using adjustment menus.
Details how to view event table results for single-direction tests in bi-directional analysis.
Guides users on viewing bi-directional event table results, including event map and column set options.
Guides users on viewing summary results for single-direction tests in bi-directional analysis.
Details safety warnings related to laser exposure, AC adapter usage, and handling precautions for optical connectors.
To Next Page
