Need help?Do you have a question about the AFL OFL280 FlexTester and is the answer not in the manual?
General| Model | OFL280 FlexTester |
|---|---|
| Event Dead Zone | 0.8 m |
| Type | OTDR |
| Measurement Units | km |
| Storage | Internal memory |
| Operating Temperature | -10 °C to 50 °C |
| Storage Temperature | -20 °C to 60 °C |
| Interface | USB |
| Data Storage | Internal memory |
Warnings and precautions regarding laser exposure from the instrument.
Precautions for using the AC adapter and avoiding electrical hazards.
Cautions on operating the device and avoiding eye injury from optical outputs.
Describes the OFL280's front panel, including keys and display.
Details the VFL, OPM, and OTDR/OLS ports on the top panel.
Describes the various OTDR test modes available on the OFL280.
Step-by-step guide on how to select a test mode from the main menu.
How to set up and operate the light source.
How to use and set up the optical power meter.
Procedure for initiating an OTDR test.
Procedure for stopping an ongoing OTDR test.
Procedures for saving test results to existing or new jobs/cables.
To Next Page
