24
For multiple-wavelength tests, press to toggle
the wavelength and display [Length], [Loss]
and [ORL] test results for that wavelength
Summary page displays:
trace graph, ber under test [Length] in user
selected units, [Loss] and [ORL] in (dB)
Summary Page Features
Information Page Features
The information page displays how the test was created.
• From the test viewer, use keys to display Information page
A
.
• Use keys to highlight the desired setup parameter.
• Use keys to change the highlighted setup parameter (except [Event Thresholds…] parameter.
You may change these parameters to correct locations in the Event Table after the test is complete
• When done, press [Recalc Events] to recalculate the Event Table.
For multiple wavelengths tests, press to
toggle the wavelength and display setup
conditions for that wavelength
These elds show the current test data
• Press key to display submenu
B
• Use keys to highlight the desired
parameter
• Use keys to change the highlighted
parameter
• When done, press [Recalc Events] to
recalculate the Event Table
A
B
To Next Page
Loading...
