Need help?Do you have a question about the AFL FlexScan FS300 and is the answer not in the manual?
General| Operating Temperature | -10°C to 50°C |
|---|---|
| Storage Temperature | -20°C to 60°C |
| Wavelength | 1550 nm |
| Distance Range | 2 km to 80 km |
| Display | Color LCD |
| Battery Life | 12 hours |
| Measurement Range | 2 km to 80 km |
| Accuracy | ±1 m |
| Power Supply | Rechargeable Li-ion battery |
Class I and Class IIIa/3R laser output classifications.
Warnings regarding AC adapter use and electrical shock prevention.
Identifies front panel controls and ports with their functions.
Steps to access and set the auto-off timer value.
Lists and briefly describes SmartAuto, Expert, and Real-time OTDR modes.
Warning and prevention of testing on live fibers.
Performing and interpreting launch quality checks.
Describes LinkMap, Event Table, Trace, and Test Info views.
Selecting network types and configuring splitters.
Choosing between ITU G.671, TIA-568.3-D, or user-configured rules.
Settings for test wavelength and fiber type selection.
Setting launch/tail cord lengths and enabling launch quality check.
Step-by-step process to initiate and run a SmartAuto OTDR test.
Key parameters for Expert/Real-time OTDR setup.
Overview of settings for Expert and Real-time OTDR modes.
Step-by-step guide for running an Expert OTDR test.
Steps to initiate and run a Real-time OTDR test.
Enabling the light source and selecting test modes/wavelengths.
Steps to enable Bluetooth on the FlexScan device.
Steps to pair the FOCIS Flex probe with FlexScan via Bluetooth.
Steps for inspecting connectors using the FOCIS Flex probe.
Instructions for connecting FlexScan to a PC and copying results.
To Next Page
