AFL FlexScan FS300 User Manual

40
Trace View – Zoom Control Enabled
Touch to zoom out vertically
around the currently active
cursor.
Touch to zoom in horizontally
around the currently active cursor.
Touch to zoom in vertically
around the currently active
cursor.
Touch to zoom out
horizontally around the
currently active cursor.
Zoom Control enabled
Note:
• Zoom In/Out centers trace
about a point where the active
cursor intersects with the active
wavelength trace
• Unzoom / Rezoom icon toggles
to show expected function
when touched (e.g. if zoomed
in, icon shows Unzoom state)
• Pinch in trace area to zoom
(horizontally or vertically)
• Swipe in trace area to pan
display (horizontally or
vertically)
Touch to Unzoom (if zoomed in);
Touch to Rezoom (If zoomed out).
Cursor B location (B is inactive
cursor). Touch non-highlighted cursor
box to make cursor active. Cursor
B is always located to the right of
cursor A.
Cursor A location (A is active). Yellow
highlight indicates the currently active
cursor. Cursor A is always located to
the left of cursor B.

AFL FlexScan FS300 Specifications

General

Brand	AFL
Model	FlexScan FS300
Category	Measuring Instruments
Language	English