AFL FlexScan FS300 User Manual

7
• CAUTION! Do not run any tests or perform functions that activate a FlexScan laser unless ber is attached to the
corresponding port.
• CAUTION! To avoid serious eye injury, never look directly into the optical outputs of ber optic network
equipment, test equipment, patch cords, or test jumpers. Refer to your company’s safety procedures when
working with optical systems.
• NOTICE: Except user replaceable battery, FlexScan OTDR contains no user-serviceable parts, it must be returned
to AFL or authorized agents for repair and calibration.
• IMPORTANT: Proper care in handling should be taken when using any precision optical test equipment.
Scratched or contaminated optical connectors can impact the performance of the instrument. It is important to
keep the dust caps in place when the unit is not being used.
• IMPORTANT: Always clean OTDR port and any mating connectors using approved cleaning supplies (e.g. One-
click cleaner) before mating the connectors.
• CAUTION! Power levels in excess of +10 dBm may damage OTDR optics. Do not connect OTDR to network
connectors where received power level may exceed +10 dBm. If high power levels are suspected, verify power
level by connecting to OPM and measuring received power level.
Safety Information
Apple Inc. Legal Notice
AirPlay, iPad, iPhone, iPod, iPod classic, iPod nano, iPod touch, and Retina are trademarks of Apple Inc., registered
in the U.S. and other countries. iPad Air, iPad mini, and Lightning are trademarks of Apple Inc.

AFL FlexScan FS300 Specifications

General

Brand	AFL
Model	FlexScan FS300
Category	Measuring Instruments
Language	English