AFL FlexScan FS300 - Saving to a Newly Created Folder; Saving to the Current Folder

57
Saving to a Newly Created Folder
Saving to the Current Folder
1 While in the Results view, touch Menu .
2 From the displayed sub-screen, touch Save As to
display the Results Manager screen.
3 Dene [Project], [End1], [End2], [Cable] and [Fiber#]
elds used to name saved results. Touch Done when
nished.
Note: this will make the newly created Job, OTDR End,
Cable, or Fiber current.
1
2
3
1 While in the Results view, touch the Menu ..
2 From the displayed sub-screen, touch Save As to
display the Results Manager screen.
3 Review [Project], [End1], [End2], [Cable] and [Fiber#]
names used to identify saved results. Touch Done
when nished.
1
2
3
File Manager
1
2
3