49
View Results in Summary Page
1. Press Wave to display the Wave menu
A
and select the desired wavelength to be displayed
(see “Wavelength Selection Menu In OTDR Pages” on page 45 for details).
2. Press View to display the View menu
B
.
3. Use arrows to select the desired option (Available when the ber has been tested in both
directions. If the ber has only been tested in one direction, one option will be shown greyed
out.):
– End 1 -> 2 to display the trace taken from End 1.
– End 2 -> 1 to display the trace taken from End 2.
4. Press key to conrm selection and exit View menu.
5. The Summary page will display the Trace Graph
C
and Summary Table
D
for the selected
test.
– If needed, switch between two column sets views, Loss Cols and Max Cols, to see the
complete analysis for the selected test.
– If needed, press the Re-Calc
E
key that allows to re-calculate events (see “Re-Calculate
Events” on page 48 for details).
OTDR Test Results Viewer
C
D
BEA
To Next Page
Loading...
