5
Mode key - Press to select operating mode (Wave ID, CW, Tone)
Output Adjust keys
- allow entering Output Adjust mode and
increase ( ) or decrease ( ) current power level within ~ 3 dB
range between the factory preset maximum and minimum power
levels
Mode
1310nm 1550nm
Wavelengths select key
Wave ID mode - selects SM single or dual Wave ID wavelengths •
CW or Tone mode - selects single wavelength •
Active Mode indicators - light up as the corresponding mode is
enabled
l
OLS2-Dual Laser Source Keys and Indicators
OLS4 Integrated LED & Laser Source Keys and Indicators
Active Output indicators - will be illuminated when the
corresponding output port is ON
Multimode Wavelength/CW select key
Press to select single or dual Wave ID wavelength(s) •
Press and hold to switch to the CW mode at the current wavelength, •
then press the key to select a single wavelength
850nm
CW
1300nm
Active Output indicators - Light up when the corresponding output port
is ON
Single or dual Wave ID - ON continuous light •
CW - ON blinking light •
CW
Hz
Wave ID
850nm
1300nm
To Next Page
Loading...
